Trouble
|
Reasons
|
Troubleshooting
|
Deviation of chain scraper
|
1. The whole equipment installed improperly; casing straightness is too large; wheel axle deflection; head, tail wheel misalignment.
2. Casing transmutation
3. Tail wheel inclines after adjusting the take-up unit
|
1.Checked the installation quality
2.Adjusting the casing
3. Readjustment
|
Chain scraper break
|
1. Chain wear
2. The conveyor Overloading operation result in the strength is not enough.
3. Some hard material fallen into the closed trough and locked the scraper
|
1.Change chain
2.Eliminate long time overloading operation
3. After manual discharging the machine should feeding uniformly
|
Chain scraper bent result in break
|
1. Casing are not straight
2. The location of flange is offset then locks the scraper.
|
1.Checked the installation quality
2.Dismantled original installation and install it again
|
During the operation of chain scraper, it gives out excessive noise
|
1. Some hard material fallen into the closed trough
2. Some chain with looseness or Inflexible faults
|
1.Clear debris
2.Change chain
|
Head wheel not fit in with chain scraper well
|
1. Head wheel chain inclines; Casing misalignment
2. The chain is wearing out after long time
operation |
1.Rectify head wheel shaft
2.Change chain
|
--------------------------------------------------------------------------------------------------------------------------------------------
Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screen, Bucket elevator, Screw conveyor, Scraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. Our goal is "be the future global leader of mining machinery industry". Have any questions, please contact us without any hesitation.
没有评论:
发表评论